A diferença entre o material de policloreto de vinila (PVC) e TPE
1. Diferenças estruturais: tpe: polímero hidrocarboneto; PVC: polímero hidrocarboneto contendo hidrocarbonetos clorados.
2. A diferença na gravidade específica: tpe: a gravidade específica é 0,84-1,4, que é mais leve; PVC: A gravidade específica geralmente está entre 1,2 e 1,4.
3. A diferença de dureza: faixa de dureza do TPE: 0A-60D faixa de dureza larga; a dureza do material de PVC macio é de 50A-90A.
4. Diferenças nas propriedades mecânicas: tpe: excelentes propriedades de tração, resistência à tração de até 12 MPa, alongamento na quebra até 10 vezes, alta resistência mecânica; PVC: Alta resistência mecânica.
5. Differences in temperature resistance: TPE can withstand temperatures above 70°C for a long time, and its maximum operating temperature is 100°C. It can still maintain a good shape at a low temperature of -40°C; PVC material can withstand low temperatures -15°C-60°C, light and heat Poor stability, the softening point of the material can be lowered to 80°C in an environment above 100°C or in a light environment, and decomposes in a high temperature environment of 130°C, and precipitates hydrogen chloride, which is an irritating gas.
6. Differences in chemical resistance: TPE is corrosion-resistant, ozone-resistant, ozone aging (38°C), performance drops below 10% in 100 hours, resistant to water, acid, alkali, alcohol and other solvents, and can be soaked in solvent or oil for a short period of time; PVC has high chemical resistance and corrosion resistance, but it is not resistant to ozone. It is a strong acid, such as concentrated sulfuric acid and concentrated nitric acid, and cannot be in contact with aromatic hydrocarbons and chlorinated hydrocarbon substances.
7. A diferença na queima: TPE: O material não contém halogênio, a fumaça queimada é baixa e não tóxica, e emite fragrância ao queimar; O PVC libera uma grande quantidade de fumaça e gases irritantes.
2. A diferença na gravidade específica: tpe: a gravidade específica é 0,84-1,4, que é mais leve; PVC: A gravidade específica geralmente está entre 1,2 e 1,4.
3. A diferença de dureza: faixa de dureza do TPE: 0A-60D faixa de dureza larga; a dureza do material de PVC macio é de 50A-90A.
4. Diferenças nas propriedades mecânicas: tpe: excelentes propriedades de tração, resistência à tração de até 12 MPa, alongamento na quebra até 10 vezes, alta resistência mecânica; PVC: Alta resistência mecânica.
5. Differences in temperature resistance: TPE can withstand temperatures above 70°C for a long time, and its maximum operating temperature is 100°C. It can still maintain a good shape at a low temperature of -40°C; PVC material can withstand low temperatures -15°C-60°C, light and heat Poor stability, the softening point of the material can be lowered to 80°C in an environment above 100°C or in a light environment, and decomposes in a high temperature environment of 130°C, and precipitates hydrogen chloride, which is an irritating gas.
6. Differences in chemical resistance: TPE is corrosion-resistant, ozone-resistant, ozone aging (38°C), performance drops below 10% in 100 hours, resistant to water, acid, alkali, alcohol and other solvents, and can be soaked in solvent or oil for a short period of time; PVC has high chemical resistance and corrosion resistance, but it is not resistant to ozone. It is a strong acid, such as concentrated sulfuric acid and concentrated nitric acid, and cannot be in contact with aromatic hydrocarbons and chlorinated hydrocarbon substances.
7. A diferença na queima: TPE: O material não contém halogênio, a fumaça queimada é baixa e não tóxica, e emite fragrância ao queimar; O PVC libera uma grande quantidade de fumaça e gases irritantes.